DimmerLiving/README.md

@@ -0,0 +1,31 @@
+# Dimmer Switch Ruleset for Two Light Groups
+
+This ruleset assumes two light groups inside the same room.
+
+The on button first turns on one group and then the other.
+So does the off button in reverse order.
+
+The lights are only switched on without changing
+the previously configured state.
+
+The lights can be reset to a bright but confortable mood for the evening
+when pressing the on button longer.
+
+Pressing the brightness buttons change the brightness,
+holding the brightness buttons change the color temperature.
+
+
+## Devices
+
+```sh
+# IDS="s/BASENAME/xxx/g; s/GROUP1/xxx/g; s/GROUP2/xxx/g; s/DIMMER/xxx/g; s/MEM/xxx/g"
+```
+
+Install the memory sensor and note its ID before proceding.
+Use the `mem.sensor.json` file, replace the `BASENAME`, and POST it to the /api/KEY/sensors URL.
+
+* `BASENAME` Basename of the ruleset
+* `GROUP1` ID of the first group to handle
+* `GROUP2` ID of the second group to handle
+* `DIMMER` ID of the dimmer switch
+* `MEM` ID of the memory sensor

DimmerLiving/dn-hold.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": 100
+				"ct_inc": 24
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": 100
+				"ct_inc": 24
 			}
 		}
 	]

DimmerLiving/dn-short.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": -16
+				"bri_inc": -25
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": -14
+				"bri_inc": -25
 			}
 		}
 	]

DimmerLiving/mem.sensor.json

@@ -0,0 +1,8 @@
+{
+	"name": "BASENAME.mem",
+	"type": "CLIPGenericStatus",
+	"modelid": "Adrium Memory",
+	"manufacturername": "Adrium",
+	"swversion": "1.0",
+	"uniqueid": "d0:ac:4e:d3:93:3b:7a:00-01"
+}

DimmerLiving/on-long.rule.json

@@ -27,6 +27,6 @@
 				"bri": 203,
 				"ct": 357
 			}
-		},
+		}
 	]
 }

DimmerLiving/up-hold.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": -100
+				"ct_inc": -24
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": -100
+				"ct_inc": -24
 			}
 		}
 	]

DimmerLiving/up-short.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": 16
+				"bri_inc": 25
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": 15
+				"bri_inc": 25
 			}
 		}
 	]

MotionSimple/README.md

@@ -0,0 +1,19 @@
+# Simple Motion Sensor Ruleset
+
+This ruleset is a simple configuration that turns on a
+group of lights when the motion sensor registers movement.
+
+It does not trigger an action, if a light in the group is already switched on.
+
+In the night, it only turns on the lights dim.
+
+## Devices
+
+```sh
+IDS="s/BASENAME/xxx/g; s/GROUP/xxx/g; s/MOTION/xxx/g; s/AMBIENT/xxx/g"
+```
+
+* `BASENAME` Basename of the ruleset
+* `GROUP` ID of the group to handle
+* `MOTION` ID of the motion sensor
+* `AMBIENT` ID of the ambient light sensor inside the motion sensor

TapSimple/README.md

@@ -0,0 +1,15 @@
+# Simple Tap Button Ruleset
+
+This ruleset is a simple configuration that turns on a
+group of lights with an increasing brightness on the buttons.
+
+
+## Devices
+
+```sh
+IDS="s/BASENAME/xxx/g; s/GROUP/xxx/g; s/TAP/xxx/g"
+```
+
+* `BASENAME` Basename of the ruleset
+* `GROUP` ID of the group to handle
+* `TAP` ID of the tap button