DimmerLiving/README.md

@@ -1,31 +0,0 @@
-# Dimmer Switch Ruleset for Two Light Groups
-
-This ruleset assumes two light groups inside the same room.
-
-The on button first turns on one group and then the other.
-So does the off button in reverse order.
-
-The lights are only switched on without changing
-the previously configured state.
-
-The lights can be reset to a bright but confortable mood for the evening
-when pressing the on button longer.
-
-Pressing the brightness buttons change the brightness,
-holding the brightness buttons change the color temperature.
-
-
-## Devices
-
-```sh
-# IDS="s/BASENAME/xxx/g; s/GROUP1/xxx/g; s/GROUP2/xxx/g; s/DIMMER/xxx/g; s/MEM/xxx/g"
-```
-
-Install the memory sensor and note its ID before proceding.
-Use the `mem.sensor.json` file, replace the `BASENAME`, and POST it to the /api/KEY/sensors URL.
-
-* `BASENAME` Basename of the ruleset
-* `GROUP1` ID of the first group to handle
-* `GROUP2` ID of the second group to handle
-* `DIMMER` ID of the dimmer switch
-* `MEM` ID of the memory sensor

DimmerLiving/mem.sensor.json

@@ -1,8 +0,0 @@
-{
-	"name": "BASENAME.mem",
-	"type": "CLIPGenericStatus",
-	"modelid": "Adrium Memory",
-	"manufacturername": "Adrium",
-	"swversion": "1.0",
-	"uniqueid": "d0:ac:4e:d3:93:3b:7a:00-01"
-}

LivingDimmer/dn-hold.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": 24
+				"ct_inc": 100
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": 24
+				"ct_inc": 100
 			}
 		}
 	]

LivingDimmer/dn-short.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": -25
+				"bri_inc": -16
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": -25
+				"bri_inc": -14
 			}
 		}
 	]

LivingDimmer/on-long.rule.json

@@ -27,6 +27,6 @@
 				"bri": 203,
 				"ct": 357
 			}
-		}
+		},
 	]
 }

LivingDimmer/up-hold.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": -24
+				"ct_inc": -100
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"ct_inc": -24
+				"ct_inc": -100
 			}
 		}
 	]

LivingDimmer/up-short.rule.json

@@ -16,14 +16,14 @@
 			"address": "/groups/GROUP1/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": 25
+				"bri_inc": 16
 			}
 		},
 		{
 			"address": "/groups/GROUP2/action",
 			"method": "PUT",
 			"body": {
-				"bri_inc": 25
+				"bri_inc": 15
 			}
 		}
 	]

MotionSimple/README.md

@@ -1,19 +0,0 @@
-# Simple Motion Sensor Ruleset
-
-This ruleset is a simple configuration that turns on a
-group of lights when the motion sensor registers movement.
-
-It does not trigger an action, if a light in the group is already switched on.
-
-In the night, it only turns on the lights dim.
-
-## Devices
-
-```sh
-IDS="s/BASENAME/xxx/g; s/GROUP/xxx/g; s/MOTION/xxx/g; s/AMBIENT/xxx/g"
-```
-
-* `BASENAME` Basename of the ruleset
-* `GROUP` ID of the group to handle
-* `MOTION` ID of the motion sensor
-* `AMBIENT` ID of the ambient light sensor inside the motion sensor

TapSimple/README.md

@@ -1,15 +0,0 @@
-# Simple Tap Button Ruleset
-
-This ruleset is a simple configuration that turns on a
-group of lights with an increasing brightness on the buttons.
-
-
-## Devices
-
-```sh
-IDS="s/BASENAME/xxx/g; s/GROUP/xxx/g; s/TAP/xxx/g"
-```
-
-* `BASENAME` Basename of the ruleset
-* `GROUP` ID of the group to handle
-* `TAP` ID of the tap button